Pqf-Prog Installation And Pc Connection; System Requirements; Installing Pqf-Prog On Your Pc; Hardware Connection - ABB PQFA Instruction Manual

8. PQF-Prog installation and PC connection

The PQF-Prog, included in the standard PQFA package, allows for the
complete programming of the filter. It consists of two Micro Floppy Disks
delivered with the filter.
8.1.

System requirements

Windows NT 4.0 Service Pack 3 minimum.
At least one free COM:port (RS232 - DB 9).
One standard RS232 cable (male-female non twisted)
8.2.

Installing PQF-Prog on your PC

1. Insert disk 1 of PQF-Prog in drive A
2. In the Start Menu, choose Run
3. In the Command Line box enter
a:\setup
4. Follow the instructions in the dialog boxes to:
? ?
Specify the drive and directory (c:\ Program Files \ Pqf is the
default)
? ?
Complete the installation
8.3.

Hardware connection

If your filter is equipped with the PQF-Manager, you just have to plug the DB
9 connection in the RS232 port situated at the front of the PQF-Manager.
If your filter is not equipped with the PQF-Manager, you have to plug the
connection in the RS232 port located on the control rack (A111: digital I/O
board) as shown here after.
A111
DIG
1 2
3
RED LED
GREEN LED
YELLOW LED
RS232-port
A112 A113 A119 A114
INT
DSP GUI LIC
1 2 1 2 1 2
3
Asea Brown Boveri Jumet S.A.
PQFA Instructions Manual
A115 A116
LVI
ALIM/GND
1 2 1
U100 U109
±15V +5V
1 2 1 2
3 4 3
50