ABB PQFA Instruction Manual page 63

Once the main circuit breaker is closed, the red light (CLOSED) of the master
and slave cubicles becomes on, while the green light (OPEN) switches off.
Master cubicle
RESET RUN
Slave cubicles:
LED n°3 of board A111 on the control rack should be red: it indicates that the
PQF is properly synchronized to the network (see illustration next page).
6. After the start-up sequence, the PQFA operates as programmed. The red
LED ' OK' of the PQF-Manager should be on.
In the LED ' FULL LOAD' appears to be on, it only means that the filter cannot
achieved the programmed requirements. Refer to the chapter on
programming with the PQF-Manager for more information.
LOC/REM ON
CLOSE
Asea Brown Boveri Jumet S.A.
PQFA Instructions Manual
CLOSE
OPEN
OPEN
63