Remote Control And Alarm Contact; Remote Control - ABB PQFA Instruction Manual

60 A
I
n1
The graph indicates the maximum value of the scale. In the above right
corner, you have the rank
harmonic identified with the arrow (? ).
Press the ? or ? key to shift your selected harmonic of one order. If you
want to move faster in the spectrum, you can use the ? or ? key. You will
then shift of 15 orders.
Press MENU and you come back to the Consulting level MENU.

10.8. Remote control and alarm contact

10.8.1.

Remote control

The PQFA may be switched on and off from a remote location.
The remote switch has to be connected to connection points X12-3 and X12-4
of terminal marked X12. In this configuration, applying a voltage to the points
X12-3 and X12-4 will switch on the filter. It will switch off when the voltage is
removed.
The remote/local switch of the master cubicle door has to be switched in
remote position.
RESET RUN
Note: once remote is on, the push buttons of the door are not operational
anymore.
Figure 10.7. Spectrum Window
(0 is for DC) and the value in amps for the
LOC/REM ON
Asea Brown Boveri Jumet S.A.
PQFA Instructions Manual
H: 0
15 A
CLOSE OPEN
85