Notes On Using This Manual And On The Ce Symbol; Notes On Using This Manual - Siemens S5-135U/155U System Manual

Notes on Using this Manual

and on the CE Symbol
Notes on Using this Manual
The S5-135U/155U PLC is a member of the family of SIMATIC S5
programmable (logic) controllers. The controller can be used in single and in
multiprocessor operation with up to four CPUs. In multiprocessor operation,
each CPU processes its individual user program independently of the other
CPUs (multicomputing).
CPUs Available The following are available as CPUs:
Slots
You can combine the CPUs arbitrarily at the CPU slots in the central
controller:
System Manual
C79000-G8576-C199-06
CPU 948 for fast word and binary signal processing especially
fast double-word and floating point processing and for
large programs with a high storage requirement;
programming in STEP 5.
When you use a CPU 948 you have an S5-155U PLC.
CPU 928B for fast word and binary signal processing and for
communication; programming in STEP 5.
CPU 928 for fast binary signal processing and for word
processing; programming in STEP 5.
CPU 922 for word processing (computing controlling
(R processor) monitoring signaling); programming in STEP 5.
CPU
CPU 948/CPU 928B/CPU 928
CPU 922/CPU 928-3UA21/
CPU 928B-3UB21
CPU 948B-3UA13/ -3UA23
1
Slot Requirement
2 slots
1 slot
1-1