Siemens S5-135U/155U System Manual page 366

Digital Input/Output Modules
8.4.12 6ES5 454-4UA13/4UA14 Digital Output Module
Rated supply voltage L+
Number of outputs
Isolation
Range for supply voltage
Fusing
Output voltage for logic 1
for logic 0
Switching current (resistive, inductive load)
Residual current at logic 0
Switching current for lamps
Switching frequency with resistive load
with inductive load
Breaking voltage (inductive)
Total switching current
Coincidence factor (total load capability)
Permissible line length
Power supply
Digital section from system bus
Current consumption from L+/L–
Power dissipation (rated operation)
Enable input (F+/F–)
Rated input voltage
Input voltage for logic 1
for logic 0
Rated input current
Permissible line length
Short-circuit monitoring
Indicator for signaling output (H+)
Output voltage , referred to L–
(with feed at 1L+) for logic 1
for logic 0
Switching current
Voltage test to VDE 0160
Mechanical specifications
Dimensions (W x H x D)
Weight
1)
Short-circuit protection responds with line resistance
2)
One digital input is permissible as minimum load.
8-54
–4UA13 –4UA14
24 V DC
1)
16, short-circuit protected
Yes, 1 group of 16 outputs
20 to 30 V DC
6.3 A, slow 7 A, fast
1 fuse per 4 outputs
L+ – 2 V min.
3 V max.
2)
10 mA to 2 A
1 mA max.
0.45 A max. (10 W)
100 Hz max.
0.2 Hz max. at 1 A; 0.1 Hz at 2 A
Limited to L+ – 47 V Limited to L+ –55 V
4 A max. per 4 outputs
50 %
400 m max., unshielded
5 V, 100 mA typical
24 V, 100 mA typical 24 V, 120 mA typical
17.5 W 10 W
24 V DC
13 to 33 V
– 33 to 5 V
5 mA
200 m max.
Red LED for 4 outputs
1L+ – 5 V min.
3 V max.
10 mA max., limited
Between group and ground point: 1250 V AC
40 mm x 255 mm x 195 mm 20 mm x 255 mm x 195 mm
Approx. 0.55 kg
4,75 ohmd, irrelevant for the –4UA14.
1 fuse per 4 outputs
1L+ –1,5 V min.
System Manual
C79000-G8576-C199-06