Mitsubishi Electric MELSEC-Q Series User Manual page 110

(14)Parameter storage location memory number (Un\G10496 to Un\G10751,
Un\G11008 to Un\G11263)
This buffer memory area stores the start addresses of the buffer memory areas of the parameter storage areas
for each slave modules.
Buffer memory
address
Un\G10496
Un\G10497
to
Un\G10750
Un\G10751
Un\G11008
Un\G11009
to
Un\G11262
Un\G11263
The following table describes the buffer memory areas corresponding to the addresses of slave modules.
Ex.
• Address 0: Input slave module
• Address 10: Output slave module
• Address 100: Output slave module
Buffer memory
address
Un\G10506
Un\G10596
Un\G11008
*1 Data stored in the buffer memory address
In a case where "3000
Ex.
parameters have been stored at buffer memory addresses "Un\G12288 to Un\G12335".
For the parameter storage location memory number of a non-existing ID, 0000
108
Description
Parameter storage
location memory
number (output)
Input slave module, I/O combined slave module ID 0200
Parameter storage Input slave module, I/O combined slave module ID 0201
location memory
number
Input slave module, I/O combined slave module ID 02FE
(input/output)
Input slave module, I/O combined slave module ID 02FF
*1
Data
3000 (12288) Parameter storage start address of the output slave module with the address 10 (ID:0010
H
3030 (12336) Parameter storage start address of the output slave module with the address 100 (ID:0100
H
3060 (12384) Parameter storage start address of the input slave module with the address 0 (ID:0200
H
" has been stored at buffer memory address "Un\G10506", it can be known that
H
Details
Output slave module ID 0000 buffer memory start address
H
Output slave module ID 0001 buffer memory start address
H
to
Output slave module ID 00FE buffer memory start address
H
Output slave module ID 00FF buffer memory start address
H
to
Description
is stored
H
buffer memory start address
H
buffer memory start address
H
buffer memory start address
H
buffer memory start address
H
)
H
)
H
)
H