Mitsubishi Electric MELSEC-Q Series User Manual page 84

(4) Devices used by users
X1000
X1001
X1003
X1004
X100 to X1FF
Y100 to Y1FF
D500 to D515
D100 to D115
M1
M10
M11
M12
M13
M100
M101, M102, M103
M155
SM62
SB20
SB47
SB49
SW70.0
SW74.0
SW78.0
T0
T100 to T104
F30
F31
82
Device
Module READY
DP/DN short error
Transmission cable voltage drop error
DP/DN disconnection error
Input data
Output data
Input information area
Output information area
Program starting contact
Z.REMTO instruction completion device
Z.REMTO abnormal end device
Z.REMFR instruction completion device
Z.REMFR abnormal end device
Device for checking the master module status (for executing the MC and
MCR instructions)
Initial setting execution supporting device
Z.REMTO instruction starting device (from the second time)
Annunciator detection
Module status
Baton pass status (own station)
Data link status of own station
Baton pass status of each station (station No.1)
Cyclic transmission status of each station (station No.1)
Parameter communication status of each station (station No.1)
Timer contact after module READY
Interlock for own station and other stations
Z.REMTO instruction error
Z.REMFR instruction error
Description