Mitsubishi Electric MELSEC-Q Series User Manual page 82

4.
Open the refresh parameter setting window, and make settings as below.
Project window  [Parameter]  [Network Parameter]  [Ethernet/CC IE/MELSECNET] 
5.
Write the set parameters into the CPU module of the master station, and reset the CPU module or
power off and on the programmable controller.
[Online]  [Write to PLC]
(b) Settings on the remote I/O station
1.
Create a project in GX Works2.
For "Series", select "QCPU (Q mode)". For "Type", select "QJ72LP25/QJ72BR15(RemoteI/O)".
[Project]  [New]
80
button
RESET
or Power OFF ON