Power Consumption - Huawei MU709 Series Hardware Manual

HUAWEI MU709 Series HSPA+ Mini PCIe Module
Hardware Guide

5.4.2 Power Consumption

The power consumptions of MU709 module in different scenarios are respectively
listed in Table 5-5 to Table 5-8 .
The power consumption listed in this section is tested when the power supply of the
MU709 module is 3.3 V, and all of test values are measured at room temperature.
Table 5-5 Averaged standby DC power consumption of MU709 module
Description
Sleep HSPA+/WCDMA
GPRS/EDGE
Radio Off
Idle HSPA+/WCDMA UMTS bands
GPRS/EDGE
Radio Off
Bands Test Value (Unit: mA)
Typical
UMTS bands 3.1
GSM bands 2.8
All bands 1.6
50
GSM bands 50
All bands 50
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Issue 04 (2015-06-25)
Electrical and Reliability Features
Notes/Configuration
Module is powered up.
DRX cycle=7 (1.28s)
Module is registered on the
network.
USB is in suspend.
Module is powered up.
MFRMS=5 (1.175s)
Module is registered on the
network.
USB is in suspend.
Module is powered up.
RF is disabled
USB is in suspend.
Module is powered up.
DRX cycle=7 (1.28s)
Module is registered on the
network, no data is transmitted.
USB is in active.
Module is powered up.
MFRMS=5 (1.175s)
Module is registered on the
network, no data is transmitted.
USB is in active.
Module is powered up.
RF is disabled.
USB is in active.
37