Table of Contents
Advertisement
Introduction to the ProCurve 700wl Series
Table 1-1. Installation Parameters
Parameter
Shared Secret
Many of these parameters can be supplied by the DHCP server if the system is configured to obtain its IP
address via DHCP. If the system is configured to use a static IP address, then all the parameters shown in
the table must be provided when the system is configured for the network.
The following tools and equipment are required to install a 700wl Series system in a rack:
•
Tape measure and level
•
Number 2 Phillips screwdriver
1-4
Form
Secret key used to establish trust relationship between an Access Control
Server and an Access Controller Module. Alphanumeric string. The same
shared secret must be configured on each system.
ProCurve Secure Access 700wl Series Installation and Getting Started Guide
Advertisement
Table of Contents
