Pptp Gateway Configuration - HP ProCurve 745wl Installation And Getting Started Manual

Hide thumbs Also See for ProCurve 745wl:
Table of Contents

Advertisement

Basic Configuration
Note: It may be necessary to remove any proxy configuration to successfully connect to the
Logon Page.
Note: The 700wl Series system comes with a self-signed SSL certificate. As a result, the client
browser may display a security alert warning that the certificate is not from a trusted source.
Click Yes to proceed.
Figure 4-1. ProCurve 700wl Series User Logon Page
Step 4.
Enter demo and password, or the username and password you created, in the Username and
Password text boxes and click
At this point, the web page you requested should appear, and you should be able to access the
network normally.
To prepare for logging on again using the PPTP connection interface, log the client off the 700wl Series
system, as shown in the following steps.
Step 5.
Set your web browser to the URL
showing the user as logged on, and displaying a
Step 6.
Logoff
Click the

PPTP Gateway Configuration

This step configures the 700wl Series system to act as a VPN termination for PPTP. After configuring the
PPTP client on your PC (see "PPTP Client Configuration" on page 4-8), you should be able to logon to the
network via the PPTP connection interface.
The steps below have you change the setting for the default Authenticated Access Policy so that it uses
PPTP. Optionally, you can set up a new Access Policy to use PPTP. See the ProCurve Secure Access 700wl
Series Management and Configuration Guide for further details, if needed.
Step 1.
From your management station, point your browser to the IP address or hostname of your Access
Control Server, and logon to the Administrative Console. The initial page of the Administrative
Console appears.
Step 2.
VPN
Click the
button to go to the Wireless Data Privacy configuration page (see Figure 4-2).
4-4
Logon User
http://1.1.1.1
button to log the client off the system.
ProCurve Secure Access 700wl Series Installation and Getting Started Guide
.
. The ProCurve Logon window appears,
Logoff
button at the top right of the window.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve secure access 700wl seriesProcurve xl

Table of Contents