Sleep_Status Signal; Led# Pin - Huawei ME909 Series Hardware Manual

HUAWEI ME909 Series LTE LGA Module
Hardware Guide

3.4.6 SLEEP_STATUS Signal

SLEEP_STATUS signal is used to indicate the sleep status of ME909. The external
devices can get to know whether the module is in sleep mode by reading
SLEEP_STATUS pin.
When SLEEP_STATUS pin is in high level, ME909 is in wakeup state.
When SLEEP_STATUS pin is in low level, ME909 is in sleep state.
Its drive current is no more than 2 mA.
Figure 3-11 shows recommended circuit of the SLEEP_STATUS pin.
Figure 3-11 Connections of the SLEEP_STATUS pin

3.4.7 LED# Pin

This function is under development.
External Circuits
Figure 3-12 shows the recommended circuits of the LED_MODE pin. According to
LED feature, you can adjust the LED brightness by adjusting the resistance of resistor
R.
Issue V0.3 (2013-05-21)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description of the Application Interfaces
30