HUAWEI MU709 Series HSPA+ LGA Module
Hardware Guide
Figure 3-8 Connections of the WAKEUP_IN pin
3.4.5 WAKEUP_OUT Signal
The WAKEUP_OUT signal is used to wake up the external devices.
Table 3-3 shows the definition of the WAKEUP_OUT signal.
Figure 3-9 shows recommended circuit of the WAKEUP_OUT pin.
Figure 3-9 Connections of the WAKEUP_OUT pin
3.4.6 SLEEP_STATUS Signal
SLEEP_STATUS signal is used to indicate the sleep status of MU709 module. The
external devices can get to know whether the module is in sleep mode by reading
SLEEP_STATUS pin.
When SLEEP_STATUS pin is in high level, MU709 module is in wakeup state.
When SLEEP_STATUS pin is in low level, MU709 module is in sleep state.
Issue 09 (2017-12-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description of the Application Interfaces
30