Power Consumption - Huawei ME909 Series Hardware Manual

HUAWEI ME909 Series LTE LGA Module
Hardware Guide
Table 5-6 Requirements for input current of the ME909 module
Power
VBAT

5.6.2 Power Consumption

The power consumptions of ME909 in different scenarios are respectively listed in
Table 5-7 , Table 5-8 , Table 5-9 , Table 5-10 and Table 5-11 .
The power consumption listed in this section is tested when the power supply of
ME909 module is 3.8 V. Typical values are measured at room temperature, and
minimum and maximum values are measured over the entire operating temperature
range.
Table 5-7 Averaged Power off DC power consumption
Description
Power off
Table 5-8 Averaged standby DC power consumption
Description
LTE
(Standby)
HSPA+/WCDMA
(Standby)
GSM/
GPRS/EDGE
(Standby)
Issue V0.3 (2013-05-21)
Peak (Maximum)
Max Avg@100uS
2500 mA
Test Value Units
TBD µA
Bands Test Value
LTE TBD
bands
UMTS TBD
bands
GSM TBD
bands
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Electrical and Reliability Features
Normal (Maximum)
Max Avg@1S
1100 mA
Notes/Configuration
VBAT is ON and the module does not
work.
Units Notes/Configuration
mA DRX cycle=8 (2.56 s)
Module is registered on
and not connected to the
4G network.
USB is in suspend mode.
mA DRX cycle=8 (2.56 s)
Module is registered on
and not connected to the
3G network.
USB is in suspend mode.
mA MFRMS=5 (1.175 s)
Module is registered on
and not connected to the
2G network.
USB is in suspend mode.
53