4.
Configure the setting not to use the module labels.
5.
Set "Basic setting" of "Module Parameter" of the high-speed counter module as shown below.
[Navigation window] [Parameter] [Module Information] [RD62P2] [Module Parameter] [Basic setting]
*1
Setting item
Pulse input mode
Counting speed setting
Counter type
Counter operation mode
Preset Value Setting
Coincidence output point No.1
Ring Counter Upper Limit Value
Ring Counter Lower Limit Value
*1 Use CH1 only. For CH2, setting items are all default value.
*2 Set the parameter only when the ring counter function is used.
APPENDICES
74
Appendix 4 Operation Examples of When the Remote Head Module Is Mounted
Setting value
3: 2-phase multiple of 1
2: 200kpps
Set the parameter according to the requirement of users.
Set the parameter according to the mode used.
2500
1000
*2
5000
*2
-5000