Details For Ordering - Siemens FDCL221-M Technical Manual

Multi line separator module

Hide thumbs Also See for FDCL221-M:

Table of Contents

Setup and function

Overview

3.1.1 Details for ordering

16 | 42

Building Technologies

Fire Safety

Applications

●

If multiple sub-stubs are to be connected to a single point on the FDnet/C-NET

detector line, either another FDnet/C-NET device or a line separator must be

mounted between the sub-stubs.

●

Time-optimized modernization of collective detector lines on the addressed

FDnet/C-NET system.

You will find information on permissible topologies in fire detection systems

FS20/FS720 in the 008843 (for 'Sinteso') and A6V10210362 (for 'Cerberus PRO')

documents in the 'Line separation function' chapter.

You will find this information for the fire detection system FC360 in document

A6V10421795.

Mounting

●

Installation in intermediate distributor or directly in a fire control panel

●

Mounting directly on a U-rail TS35

●

Mounting directly on a flat surface with two screws