Mounting With Housing Fdch221 - Siemens FDCL221-M Technical Manual

5.3 Mounting with housing FDCH221

Building Technologies
Fire Safety
The multi line separator module can be installed in a separate housing FDCH221.
The housing protects the multi line separator module from dirt and dust.
Proceed as follows to mount the multi line separator module in housing FDCH221:
1. Break open required cable entries on housing.
2. Install housing on a flat surface.
3. Insert cables. If necessary, fasten the cables using the M20 x 1.5 cable glands
or use a different cable entry.
4. Install multi line separator module in housing with enclosed fixing screws.
5. Connect cables to corresponding terminals (see 'Installation and connection
diagram [➙ 32]').
6. Close housing using supplied screws.
Ø max. 4.8 mm
Figure 11: Installing the multi line separator module in housing FDCH221
See also
2 Installation and connection diagram [➙ 32]
Mounting / Installation
Mounting with housing FDCH221
A6V10224006_g_en_--
5
31 | 42
2018-10-25