Mounting / Installation
5
Removing from the U-rail
5.2 Removing from the U-rail
30 | 42
Building Technologies
Fire Safety
Figure 9: Vertical or horizontal mounting on U-rail TS35
See also
2 Installation and connection diagram [➙ 32]
Proceed as follows to remove the multi line separator module from the U-rail:
1. Place a screwdriver at a right angle between the mounting foot and the
mounting surface of the U-rail.
2. Turn screwdriver to release mounting foot.
1
Figure 10: Removing the multi line separator module from a U-rail
1 Screwdriver size 4
A6V10224006_g_en_--
2018-10-25