BDisk/Tape Controller Data
Disk/Tape Controller Modules Supported
The following VMEbus disk/tape controller modules are
supported by the 162Bug. The default address for each controller
type is First Address and the controller can be addressed by First
CLUN during commands BH, BO, or IOP, or during TRAP #15
calls .DSKRD or .DSKWR. Note that if another controller of the
same type is used, the second one must have its address changed by
its onboard jumpers and/or switches, so that it matches the
''Second Address'' value and can be called up by the ''Second
CLUN'' value.
Controller Type
CISC Embedded Controller
MVME328 - SCSI Controller 1
MVME328 - SCSI Controller 2
MVME328 - SCSI Controller 3
*If an MVME162LX with an SCSI port is used, that board has CLUN 0.
First
First
CLUN
Address
$00*
--
$06
$FFFF9000
$16
$FFFF4800
$18
$FFFF7000
Second
Second
CLUN
Address
--
--
$07
$FFFF9800
$17
$FFFF5800
$19
$FFFF7800
B
B-1