1 - 4
SB1 Integrator Guide
Battery Charging Screen
Figure 1-5
Resetting the SB1
If the SB1 stops responding to input, perform a reset (cold boot). A reset stops all running applications and any
unsaved data (not specifically persisted in the UserDrive folder) is lost. Simultaneously press and hold the
Home and Scan buttons for five seconds. When the SB1 beeps release the buttons and then it resets.
Start Up
After the SB1 boots up for the first time the Home screen displays. Refer to the SB1 User Guide for information
on using the Home screen.
Home Screen
Figure 1-6
The SB1 is pre-loaded with a number of applications. Touch
Applications Screen
Figure 1-7
The Applications screen has the following applications:
to open the Applications screen.