Table of Contents
Advertisement
Click OK.
16.
Preparing Generic Staging Content
To prepare the generic staging content:
Determine all WLAN(s) that will be used when staging the SB1.
1.
Determine the WLAN(s) that will be used by the SB1 after staging.
2.
Log in to the MSP Console and create one WLAN Settings Object for each unique WLAN.
3.
Enter a unique name for the WLAN.
•
Enter the configuration information for each unique WLAN.
•
Determine which FTP servers will be used when staging the SB1.
4.
Ensure that an MSP Relay Server Object has been created by the MSP Administrator to represent each
5.
FTP server.
Preparing Infrastructure to Support a Well-Known Staging WLAN
Configure the WLAN infrastructure to support a local WLAN with the following characteristics:
SSID = "airbeam"
•
Authentication = Open
•
Encryption = WEP128 or WEP104
•
WEP Key Index = 1
•
Hex WEP Key 1 = "101112131415161718191a1b1c"
•
Since this Staging WLAN uses low security, limit access to the WLAN by:
Locating it in a secure area.
a.
Lowering the RF power or using a limited range antenna.
b.
Enabling the Staging WLAN only when staging is being performed.
c.
UserDrive Update
To prepare UserDrive folder content using the MSP Server:
Customize the sample baseline Sb1SampleBasline package as required to suit the requirements for the
1.
customer application environment. See
Create one or more Rho-based application packages using the MSP Package Builder and the
2.
RhoApplication template See
Create a bundle containing the following deployment steps:
3.
The customized baseline package from step 1.
a.
Any Rho-based application packages created in step 2.
b.
Create a Staging Profile with some or all of the following:
4.
WLAN settings (see
a.
Relay Server settings (see
b.
Sample Baseline Package Customization on page
Creating Application Packages on page
Preparing Generic Staging Content on page
Preparing Generic Staging Content on page
Staging and Deployment 4 - 15
4-11.
4-12.
4-15.
4-15.
Advertisement
Table of Contents
