Single Slot Charging Cradle
Use the Single Slot Charging cradle to charge the SB1 battery.
CAUTION
Setup
To set up the Single Slot Charging Cradle:
Plug the power plug of the power supply into the power port of the cradle.
1.
Power Port
Single Slot Charging Cradle Setup
Figure 2-1
Plug the power supply into an outlet.
2.
Charging
To charge the SB1:
If attached, remove SB1 from the lanyard.
1.
Place the SB1 into the slot with the Scan button facing up. The LED Indicator indicates the SB1 battery
2.
charging status. The battery charges in less than four hours. See
Ensure to follow the guidelines for battery safety described in
Accessories
Battery Safety Guidelines on page
Power Supply
for charging status indications.
Table 2-2
2 - 3
5-1.