How To Protect An Update Using Updateinprogress - Motorola SB1 Integrator Manual

4 - 26 SB1 Integrator Guide
Click OK.
c.
Select File > Save to save the new package project file.
4.
Modify the ld.txt file in the folder to which the package content files were extracted.
5.
Select File > Save to save the modified package project file.
6.
Select Tools > Generate APF File to make a package file containing the modified content.
7.
Enter a package version.
8.
Customized ld.txt File Example
Table 4-8
Original File Contents
@lock
Motorola MSP
A Software Update is in progress
Please do not use this device
Until further notice
Button
*
NOTE The ld.txt file must always contain exactly 7 text lines, as shown above.
Only text lines 2, 3, 4, and 5 should be changed, if desired, to alter the text that will be displayed on the
SB1 screen.
Be sure to test any long text strings to ensure that they do not get truncated when they are displayed on
the device screen.

How to Protect an Update Using UpdateInProgress

This section describes the steps required to protect an update when using the UpdateInProgress package:
Create a bundle containing the following:
1.
The SB1SaveCalibration package - The Force Install option should not be set for this deployment step
•
so the package is skipped if it is already present on the SB1.
The UpdateInProgress package - This package can optionally be customized, if desired. See
•
Customizing the UpdateInProgress Package on page
this deployment step so the package is deployed even if it is already present on the SB1.
Deployment steps to perform whatever update is desired.
•
The EndUpdateInProgress package - The Force Install option should be set for this deployment step
•
so the package is always deployed even if it is already present on the SB1.
Create a policy or action to deploy the bundle.
2.
When a job to execute the bundle from step 2 is executed, a dialog box displays on the SB1 screen
•
when the UpdateInProgress package is installed. The dialog box re-displays even following cold boots
that occur during the update. The dialog box is removed when the EndUpdateInProgress package is
installed.
Example Custom Contents
@lock
My Company Name
This device is being updated
and should not be used until
this message disappears
Button
*
4-25. The Force Install option should be set for