Enhanced Level Commands
4.1 Program support functions (1)
Tool offset
Tool offsets are ignored in the canned cycle mode.
Example
M3 S1500;
G90 G0 Z100
G90 G99 G81 X200. Y--150. Z--100. R50. F120.;
Y--500.;
Y--700.;
X950.;
Y--500.;
G98 Y--700.;
G80;
G28 G91 X0 Y0 Z0; Return to the reference position return
M5;
4-104
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) -- 04.07 Edition
Rotate spindle
Position, drill hole 1, and return to point R.
Position, drill hole 2, and return to point R.
Position, drill hole 3, and return to point R.
Position, drill hole 4, and return to point R.
Position, drill hole 5, and return to point R.
Position, drill hole 6, and return to the initial level.
Cancel canned cycle
Spindle stop
© Siemens AG 2007 All rights reserved
04.07