Variables; E.3 Variables - Siemens SINUMERIK 802D sl Programming Manual

Data Fields, Lists

E.3 Variables

E.3

Variables

Identifier Type
$C_A REAL
$C_B REAL
.... ....
$C_G INT
$C_H REAL
$C_I[ ] REAL
$C_I_ORDER[ ] REAL
$C_J[ ] REAL
$C_J_ORDER[ ] REAL
$C_K[ ] REAL
$C_K_ORDER[ ] REAL
$C_L INT
.... ....
$C_Z INT
$C_TS STRING
$C_A_PROG INT
$C_B_PROG INT
.... ....
$C_G_PROG INT
$C_Z_PROG INT
$C_TS_PROG INT
$C_ALL_PROG INT
$P_EXTGG[n] INT
$C_INC_PROG INT
E-242
Value of programmed address A in ISO Dialect mode for cycle programming
Value of programmed address B in ISO Dialect mode for cycle programming
.....
G number for cycle calls in external mode
Value of programmed address H in ISO Dialect mode for cycle programming
Value of programmed address I in ISO Dialect mode for cycle programming and macro
programming with G65/G66. Up to 10 items are possible in one block for macro
programming. The values are stored in the array in the order in which they are
programmed.
For description see $C_I[ ], used to define the programming sequence
For description see $C_I[ ]
For description see $C_I[ ], used to define the programming sequence
For description see $C_I[ ]
For description see $C_I[ ], used to define the programming sequence
Value of programmed address L in ISO Dialect mode for cycle programming
....
Value of programmed address Z in ISO Dialect mode for cycle programming
String of tool name programmed at address T
Address A is programmed in a block with a cycle call.
0 = not programmed
1 = programmed (absolute)
3 = programmed (incremental)
Address B is programmed in a block with a cycle call.
0 = not programmed
1 = programmed (absolute)
3 = programmed (incremental)
....
The shell cycle call is programmed with a G function
Address Z is programmed in a block with a cycle call.
0 = not programmed
1 = programmed (absolute)
3 = programmed (incremental)
A tool name was programmed at address T
TRUE = programmed, FALSE = not programmed
Bitmap of all programmed addresses in a block with a cycle call
Bit 0 = address A
Bit 25 = address Z
Bit = 1 address programmed in incremental dimensions
Bit = 0 address not programmed
Active G code of the external language
Bitmap of all programmed incremental addresses in a block with a cycle call
Bit 0 = address A
Bit 25 = address Z
Bit = 1 address programmed in incremental dimensions
Bit = 0 address programmed in absolute dimensions
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) - - 04.07 Edition
Description
© Siemens AG 2007 All rights reserved
04.07