Hitachi HIDIC EH-150 Applications Manual page 28

Table 5.2.6.1 The list of items of IP address operation frame
No Name
EH-ETH Information
1) IP address To set the IP address of EH-ETH
2) Subnet mask To set the Sub Net Mask of EH-ETH
3) Default Gateway To set the Gate Way address of EH-ETH
Routing Information [1:6]
4-1) Network address To set the network address of the destination of routing.
5-1) Subnet mask To set the Sub Net Mask of the destination of routing.
6-1) Gateway To set the Gate Way address of the destination of routing Except 0.0.0.0 and 255.255.255.255
Other station for Diagnosis
7) IP address To set the destination IP address of EH-ETH's testing.
8) Port No. To set the destination Port number of EH-ETH's testing. Between 1 and 65535
When you click the "Set" button on the frame, EH-ETH will check the parameters. If all parameters are
correct, they will be saved into set up file, and the "IP address display frame" will appear. If they are wrong,
set up file is not updated. In this case, please check and correct the value, and set again.
To cancel the input value, please click the "Return" button of Web browser. The frame will return to the "IP
address display frame".
Trouble shoot
After click "Set" button, there is a case which setting value is not displayed. In this case, you can solve by setting of
Web browser. See "10.1 Trouble shooting flow (2) Various setting".
Chapter 5 Configuration and procedure for starting communication
1)
2)
3)
4-1)
5-1)
6-1)
4-2)
5-2)
6-2)
4-3)
5-3)
6-3)
4-4)
5-4)
6-4)
Figure 5.2.6.2 IP address setting frame
Description
5-9
4-5)
5-5)
6-5)
4-6)
5-6)
6-6)
7)
8)
Range for setting
Except 0.0.0.0 and 255.255.255.255
Between 255.0.0.0 and 255.255.255.248
Except 0.0.0.0 and 255.255.255.255
Except 0.0.0.0 and 255.255.255.255
Between 255.0.0.0 and 255.255.255.255
Between 0.0.0.0 and 255.255.255.255