Removing a Power Supply Module
NOTICE:
The power supply modules are hot-pluggable. Remove and replace only
one power supply module at a time in a system that is turned on.
1 Release the power cord retention clip and disconnect the power cord from
the power supply module. See Figure 4-1.
Figure 4-1. Power Cable Retention Clip
1
power supply
3
notch in power supply handle
5
power cable
2 Press down on the power supply module release button on the handle. See
Figure 4-2.
1
2
retention clip tether
4
retention clip
Installing Enclosure Components
2
3
4
5
159