Brocade M4424 San I/O Module - Dell PowerEdge M605 Hardware Owner's Manual

Table 1-15. Fibre Channel Pass-through Indicators (continued)
Indicator Type Pattern
Fibre Channel Port LEDs with Qlogic Mezzanine Card Installed
Green off, amber
off
Green off, amber
on
Green on, amber
off
Green off, amber
flashing
Green flashing,
amber off
Green flashing
and amber
flashing at same
time
Green flashing
and amber
flashing at
different intervals
Off/amber
flashing (twice
per second)

Brocade M4424 SAN I/O Module

The Brocade M4424 SAN I/O module includes eight external autosensing
Fibre Channel ports (four ports are enabled in the standard configuration and
four additional ports may be enabled as an optional upgrade), 16 internal
ports, and one serial port with an RJ-45 connector. The external Fibre
Channel ports operate at 1 Gb/sec, 2 Gb/sec, or 4 Gb/sec. The Fibre Channel
switch module is hot-pluggable, and may be installed in Fabric B or Fabric C.
For general information on installing this module, see "I/O Modules" on
page 166.
Description
Power off
Online, 1 Gb or 2 Gb link
Online, 4Gb link
I/O activity, 1 Gb or 2 Gb
I/O activity, 4 Gb
Loss of synchronization
Firmware error
Connection has lost synchronization.
About Your System
61