Figure 4-10. Removing and Installing the Control Panel
1
1
control panel
3
screws (2)
5 Press the catch at each end of the control-panel cable connector, and
remove the control-panel cable from the underside of the control panel.
6 Use the pull-tab to disconnect the LCD panel cable from the underside of
the control panel.
Installing the Enclosure Control Panel
CAUTION:
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.
1 Connect the LCD panel cable to the new control panel.
2 Connect the control panel cable to the underside of the new control panel.
174
Installing Enclosure Components
2
Only trained service technicians are authorized to remove the system
2
control-panel cable
4
LCD panel cable
3
4