7C-8 CLUTCH
CLUTCH COVER, CLUTCH DISC AND FLYWHEEL
1. Flywheel
2. Clutch release shaft seal
: Apply grease 99000-25010 to seal lip. (0.3 g)
3. Clutch release shaft No.2 bush
: Apply grease 99000-25010 to bush inside. (0.3 g)
4. Return spring
5. Clutch release shaft
Apply grease 99000-25010 to the end of release shaft arm. (0.3 g)
6. Clutch release shaft No.1 bush
: Apply grease 99000-25010 to bush inside. (0.3 g)
UNIT REPAIR OVERHAUL
REMOVAL
1) Dismount transmission assembly referring to Section 7A.
2) Hold flywheel stationary with special tool (A) and remove
clutch cover bolts (1), clutch cover (2) and clutch disc.
Special tool
(A) : 09924-17810
7. Release bearing
: Apply grease 99000-25010 to joint of bearing and release
shaft and also bearing inside. (0.3 g)
8. Clutch cover
9. Clutch disc
10. Clutch cover bolt
Tightening torque
Do not reuse.