Turn Signal And Hazard Warning Lights; Turn Signal Light Switch; Headlight Leveling Switch (If Equipped); Removal And Installation - Suzuki Ignis Service Manual

8-12 BODY ELECTRICAL SYSTEM

TURN SIGNAL AND HAZARD WARNING LIGHTS

TURN SIGNAL LIGHT SWITCH

REMOVAL AND INSTALLATION

Refer to "CONTACT COIL AND COMBINATION SWITCH ASSEMBLY" in Section 3C.
INSPECTION
Check for continuity between terminals at each switch position as shown below. If check result is not as speci-
fied, replace.
R
N
L
[A] : LH steering vehicle
[B] : RH steering vehicle

HEADLIGHT LEVELING SWITCH (IF EQUIPPED)

INSPECTION
Check for resistance between terminals at each switch position
as shown below. If check result is not as specified, replace.
Headlight leveling switch resistance
Position
–
0
1
2
3
4
Turn signal SW
L
N
R
[A]
TR TL TB
Terminals
VCC and GND
SIG and GND
Terminal
TL TB
[B]
Resistance (KΩ Ω Ω Ω )
4.3 - 4.9
3.7 - 4.1
3.1 - 3.4
2.4 - 2.7
1.7 - 2.0
1.1 - 1.3
TR
TB TR TL