Table of Contents
Advertisement
6A1-6 ENGINE MECHANICAL (M13 ENGINE)
13) After checking, install spark plugs and ignition coil assem-
blies (1) with high-tension cord (2).
14) Connect ignition coil couplers (3).
15) Connect fuel injector wires(4) at the coupler.
16) Check cylinder head upper cover gasket for deterioration
and then install it into groove of cylinder head upper cover
(1) securely.
17) Install cylinder head upper cover with gasket on to cylinder
head cover.
18) Install air cleaner assembly, resonator and hoses referring to
"AIR CLEANER ASSEMBLY AND RESONATOR".
ENGINE VACUUM CHECK
The engine vacuum that develops in the intake line is a good indi-
cator of the condition of the engine. The vacuum checking proce-
dure is as follows :
1) Warm up engine to normal operating temperature.
NOTE:
After warming up engine, be sure to place transmission
gear shift lever in "Neutral" (shift selector lever to "P"
range for A/T model), and set parking brake and block
drive wheels.
2) Stop engine and turn off the all electric switches.
3) Remove cap (1) from intake manifold.
Advertisement
Table of Contents
