Dtc C1113 (Dtc No.13) Torque Sensor Main And Sub Circuit Failure - Suzuki Ignis Service Manual

3B1-16 ELECTRICAL POWER STEERING (P/S) SYSTEM
DTC C1111 (DTC No.11) TORQUE SENSOR MAIN CIRCUIT FAILURE

DTC C1113 (DTC No.13) TORQUE SENSOR MAIN AND SUB CIRCUIT FAILURE

DTC C1115 (DTC No.15) TORQUE SENSOR SUB CIRCUIT FAILURE
1
2
1. To main fuse
2. Ignition switch
3. "P/S" fuse (30A) in fuse box
Step
1 1) Was "SYSTEM CHECK FLOW TABLE" per-
formed?
2 1) Is DTC C1114 (DTC No.14) or C1116 (DTC
No.16) indicated, too?
3 1) Check proper connection for 5-terminals
connector ("G24-1") to P/S control module.
2) If OK, check torque sensor and its circuit.
Refer to "TORQUE SENSOR".
Is torque sensor in good condition?
5
G24-1-1
G24-1-2
3
BLK/RED
G24-1
G24-1-3
4
BLK/WHT G24-1-4
G24-8
G24-1-5
G24-2
4. "IG METER" fuse (15A) in fuse box
5. P/S control module
6. Torque sensor
Action
G24-1
RED
BLU
BLK
6
YEL
WHT
BLK
Yes
Go to STEP 2.
Go to flow table corre-
sponding to each DTC
No.
Substitute a known-good
P/S control module and
recheck.
7
G24-2
G24-8
8
G24-1-1
G24-1-2
G24-1-3
G24-1-5
G24-1-4
7. Connector "G24"
8. Connector "G24-1"
No
Go to "SYSTEM CHECK
FLOW TABLE".
Go to STEP 3.
Replace steering column
assembly and recheck.