Air Cleaner Assembly And Resonator; Knock Sensor; Cylinder Head Cover - Suzuki Ignis Service Manual

AIR CLEANER ASSEMBLY AND RESONATOR

REMOVAL
1) Disconnect negative cable at battery.
2) Disconnect IAT sensor coupler (1).
3) Disconnect breather hose (2) from cylinder head cover.
4) Remove air cleaner assembly (3), resonator (4) and their
hoses.
INSTALLATION
Reverse removal procedure for installation.

KNOCK SENSOR

Refer to "KNOCK SENSOR" in Section 6E.

CYLINDER HEAD COVER

REMOVAL
1) Disconnect negative cable at battery.
2) Remove air cleaner assembly, resonator and hoses by refer-
ring to "AIR CLEANER ASSEMBLY AND RESONATOR".
3) Remove cylinder head upper cover (1).
4) Disconnect ignition coil couplers (1).
5) Remove ignition coil assemblies (2) with high-tension cord
(3).
ENGINE MECHANICAL (M13 ENGINE) 6A1-13