Air Cleaner Assembly Removal And Installation; Air Cleaner Filter Removal And Installation; Air Cleaner Filter Inspection And Cleaning - Suzuki 2006 SX4 Service Manual

Air Cleaner Assembly Removal and Installation

Removal
1) Remove air cleaner inlet hose (2) and outlet hose.
2) Disconnect MAF sensor connector (3).
3) Remove air cleaner case (1).
3
Installation
1) Install air cleaner case (1).
2) Connect MAF sensor connector (3), and tighten
hose clamp to specified torque.
Tightening torque
Air cleaner outlet hose clamp: 3 N·m (0.3 kgf-m,
2.5 lb-ft)
3) Install air cleaner inlet hose (2) and outlet hose.
3
S6RW0C1406002
2
1
I7RW01140017-01
2
1
I7RW01140017-01

Air Cleaner Filter Removal and Installation

Removal
1) Open air cleaner case (1) by unhooking its clamps
(2).
2) Remove air cleaner filter.
2
2
Installation
Reverse removal procedure for installation.

Air Cleaner Filter Inspection and Cleaning

Inspection
Check that filter is not excessively dirty, damaged or oily,
clean filter with compressed air from air outlet side of
filter.
Cleaning
Blow off dust by compressed air from air outlet side of
filter.
Engine Mechanical: 1D-8
S6RW0C1406003
1
I7RW01140020-01
S6RW0C1406004
I2RH01140007-01