Automatic Transaxle Unit Components; Automatic Transaxle Unit Dismounting And Remounting - Suzuki 2006 SX4 Service Manual

Automatic Transaxle Unit Components

8 30 N·m (3.0 kg-m)
8 11 N·m (1.1 kg-m)
5 23 N·m (2.3 kg-m)
1. Clutch housing plate
2. Transaxle to engine nut
3. Transaxle to engine bolt
Automatic Transaxle Unit Dismounting and
Remounting
Dismounting
1) Take down transaxle with engine. For its procedure,
refer to "Engine Assembly Removal and Installation
in Section 1D".
2) Remove engine rear mounting No. 1 bracket and
engine rear mounting No. 2 bracket with stiffener (for
2WD vehicle).
3) Remove transfer referring to "Transfer Dismounting
and Remounting in Section 3C" (for 4WD vehicle).
4) Remove center bearing support bolts (3) and remove
center bearing support (2) with center shaft (1) from
differential side gear (for 2WD vehicle).
1
3 85 N·m (8.5 kg-m)
1
6
7 70 N·m (7.0 kg-m)
4. Torque converter
5. Drive plate to torque converter bolt
6. Drive plate
S6RW0C5106029
3
2
I2RH01510089-01
Automatic Transmission/Transaxle:
4
3
7. Drive plate bolt
8. Clutch housing plate bolt (M6 and M10)
: First tighten M16 bolt and next tighten M16 bolt
: Tightening torque
5) Remove clutch housing plate (1).
1
6) Remove torque converter bolts.
To lock drive plate (1), engage a flat head rod or the
like (2) with drive plate gear.
1
S6RW0C5106028
2 85 N·m (8.5 kg-m)
85 N·m (8.5 kg-m)
I7RW01510044-02
I7RW01510045-01
2
I7RW01510046-01
5A-83