Visual Inspection; Engine Basic Inspection - Suzuki 2006 SX4 Service Manual

Visual Inspection

Visually check the following parts and systems.
Engine oil
Engine coolant
Fuel
A/T fluid
Air cleaner element
Battery
Water pump belt
Throttle valve
Vacuum hoses of air intake system
Connectors of electric wire harness
Fuses
Parts
Bolt
Other parts that can be checked visually
Also add the following items at engine start, if possible
MIL
Charging light
Engine oil pressure light
Engine coolant temp. meter
Fuel level meter
Tachometer
Exhaust system
Abnormal air being inhaled from air intake system
Other parts that can be checked visually

Engine Basic Inspection

This check is very important for troubleshooting when ECM has detected no DTC and no abnormality has been found
in "Visual Inspection".
Follow the flow carefully.
Step
1 Was "Engine and Emission Control System Check"
performed?
2 Check battery voltage
Is it 11 V or more?
3 Is vehicle equipped with keyless start control system?
4 Check keyless start control system for operation
1) Check keyless start control system referring to "Keyless
Start System Operation Inspection in Section 10E".
Is check result satisfactory?
Inspection Item
Level, leakage
Level, leakage
Level, leakage
Level, leakage
Dirt, clogging
Fluid level, corrosion of
terminal
Tension, damage
Operating sound
Disconnection, looseness,
deterioration, bend
Disconnection, friction
Burning
Installation, deformation
Looseness
Operation
Operation
Operation
Operation
Operation
Operation
Leakage of exhaust gas, noise —
Action
Engine General Information and Diagnosis:
Referring section
"Engine Oil and Filter Change in Section 0B"
"Coolant Level Check in Section 1F"
"Fuel Leakage Check Procedure in Section
1G"
"Automatic Transaxle Fluid Level Inspection
in Section 0B"
"Accessory Drive Belt Inspection in Section
0B"
"Battery Description in Section 1J"
"Accessory Drive Belt Inspection in Section
0B"
"Electric Throttle Body Assembly On-Vehicle
Inspection in Section 1C"
"Vacuum Hose and Purge Valve Chamber
Inspection in Section 1B"
"Intermittent and Poor Connection Inspection
in Section 00"
—
—
—
"Malfunction Indicator Lamp (MIL) Check"
"Generator Symptom Diagnosis in Section
1J"
"Oil Pressure Switch Inspection in Section
9C"
"Engine Coolant Temperature (ECT) Sensor
Inspection in Section 9C"
"Fuel Level Sensor Inspection in Section 9C"
—
—
—
Yes
Go to Step 2.
Go to Step 3.
Go to Step 4.
Go to Step 5.
1A-47
S6RW0C1104009
S6RW0C1104010
No
Go to "Engine and
Emission Control
System Check".
Charge or replace
battery.
Go to Step 5.
Keyless start control
system malfunction.