Second Machine Control Panel - Siemens SINUMERIK FM-NC Installation And Startup Manual

08.97
03.96
3.8

Second machine control panel

Two machine control panels can be operated with the SINUMERIK 840D. The
second MCP must be parameterized in the basic program parameters in FB1.
3.9 MMC 100/MMC 102/103 operator panel
3.9.1 Settings on the MMC
OPI (default)
The operator panel interface (OPI) with a baud rate of 1.5 Mbaud is set as the
default on the MMC.
S
S
Screen
MD 9000: LCD_CONTRAST (contrast)
The contrast setting can be entered directly in the machine data or selected by
means of the "LCD brighter" or "LCD darker" softkey in the "Diagnosis" menu.
MD 9001: DISPLAY_TYPE (monitor type)
The monitor type (e.g. LCD monochrome, LCD color) is entered in this machine
data (for MMC 100).
Language
MD 9003: FIRST_LANGUAGE (foreground language for MMC 100)
S
S
Display resolution
MD 9004: DISPLAY_RESOLUTION
The display resolution for position values on the screen is entered in this ma-
chine data. The maximum number of digits on the screen is 10, before or after
the decimal point (e.g.: 4 places after decimal point, max. display =
+/– 999999.9999).
Screen
MD 9006 (for MMC100):
saver In this MD you set the time after which the screen saver is to be activated. The
screen saver is activated if none of the keys on the operator panel have been
pressed within the specified time.
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
3.9
MMC 100
The MMC100 is automatically set to the baud rate.
MMC102/103
The MMC102/103 must be set to a baud rate of 1.5 Mbaud in the "Start-up/
MMC/Operator panel" menu.
MMC100
One of two languages can be called in the MMC 100.
MMC102/103
The MMC102/103 is always supplied with a selection of languages. English
is the default setting.
3 Settings, MPI / OPI
MMC 100/MMC 102/103 operator panel
3
3-69