Adjusting The Antenna Position - NEC AP300 Installation Manual

3.

ADJUSTING THE ANTENNA POSITION

Note: You only need to change the antenna position when you mount the AP300
horizontally! In all other cases you don't need to change the antenna position.
Figure 3. AP300 mounted horizontally
Procedure for Adjusting the Antenna position.
Note: Antenna position can be changed once. You should not change it back!
1. Remove the two screws from the rear side of the cabinet
Screws are
inside these
holes
Figure 4. Rear side of Cabinet.
March 2010 AP300 Customer Engineer Manual 7
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner