NEC AP300 Installation Manual page 41

6. Mount the swivel in the hole that you have drilled. Do not forget to install the rubber
ring to seal the conjunction between the swivel and the cabinet. The conjunction must
be waterproof.
7. Put the foam back into the cabinet.
8. Keep the cabinet in the correct position against the wall and mark the mounting holes
in the corners of the cabinet on the wall. If necessary use the template that was
delivered with the cabinet..
12
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
Figure 15. Swivel with black rubber ring.
Figure 16. Swivel mounted to the cabinet.
Outdoor Cabinet Isolated - Installation Manual March 2010