Specifications - NEC AP300 Installation Manual

8.

SPECIFICATIONS

Dimensions / Environment:
− Dimensions (W x D x H) ....... :
− Outside temperature range ... :
− IP Specification .................... :
− Relative Humidity .................. :
PoE Specifications:
− Voltage at AP300 via PoE ... :
− PoE Class ............................. :
− Power Consumption ............. :
IP Specifications:
− IP Network ............................ :
− Connector: ............................ :
− Cable .................................... :
− IP Version ............................. :
− DHCP/TFTP support............. :
− Quality of Service .................. :
Audio Algorithm:
− AP300: .................................. :
− AP300 with Daughter Board . :
Country/Region support:
− EMEA ................................... :
− Latin America ........................ :
− North America ....................... :
Note: Country selection is determined by the DAP Controller Type! See section 1.2
COUNTRY SELECTION.
March 2010
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
145 x 43 x 174
0° C . . . 45° C
In Outdoor Box = IP66
5 . . . 95 %
36 . . . . 57 V. DC
Class 2
6 Watt maximum
10/100Base-T IEEE802.3
RJ45
Cat 5 UTP or better
IPv4
Yes
IEEE802.1Q, IEEE802.1P
G.711
G.711 and G.729
1880 – 1900 Mhz
1910 – 1930 MHz
1920 – 1930 MHz (3 dB lower output power)
AP300 Customer Engineer Manual 17