Table of Contents
Advertisement
1.4.
CABLE SPECIFICATIONS FOR AP300 Types
The cabling to the AP300(E) is "Category 5" Ethernet cabling. However, the cabling (and
AP300(E)) is submitted to the following safety restriction:
Caution:
The cabling and/or the AP300(E) may never be exposed to over-voltages (e.g.
lightning). Therefore, the AP300(E) and cabling associated with it may never
be installed outdoors! However there is an exception: if installed in the Outdoor
Cabinet, and the Outdoor Cabinet is mounted against a wall and the cable is
led directly indoors, it is permitted.
The power for the AP300(E) must be supplied via the Ethernet cable, PoE (IEEE 802.3af).
There is no room for a Mains Power adaptor inside the Outdoor Cabinet.
1.5.
VISUAL CHECK
The equipment must be carefully unpacked and examined for any visible sign of damage.
Anything not in order should be reported back to the supplier, as soon as possible, to avoid
delays during installing due to missing equipment.
1.6.
INSTALLATION PROCEDURES
The installation of an Outdoor Cabinet comprises the installation of:
-
Fixing the Cabinet to a wall.
-
Installing the AP300(E) in the Cabinet.
-
Connecting the Ethernet cable.
March 2010
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
Outdoor Cabinet Installation Manual
3
Hide quick links:
Advertisement
Chapters
Table of Contents
