Step 3 Inserting A Cassette - Sony DCR-IP210 Operating Instructions Manual

Step 3 Inserting a cassette

(1) Prepare the power source (p. 17).
(2) Slide OPEN/Z EJECT
cassette compartment automatically lifts up and opens.
(3) Push the middle portion of the back of the cassette into the cassette
compartment.
Insert the cassette in a straight line deeply with the cassette window facing the
cassette lid.
(4) Close the cassette compartment by pushing down the cassette lid halfway. The
cassette compartment automatically goes down.
(5) After the cassette compartment goes down completely, close the lid.
2
OPEN/Z EJECT
Cassette lid
To eject a cassette
Follow the procedures above, and take out the cassette after the cassette compartment
opens completely in step 2.
Note
Do not press the cassette compartment down. Doing so may cause a malfunction.
To prevent accidental erasure
Slide the write-protect tab on the cassette to expose the red mark.
in the direction of the arrow and open the lid. The
3
Cassette window
Cassette
compartment
4,5
25