Editing; Dubbing A Tape - Sony DCR-IP210 Operating Instructions Manual

— Editing —

Dubbing a tape

Using the A/V connecting cable
You can dub or edit on the VCR connected to your camcorder using your camcorder as
a player. Connect your camcorder to the VCR using the A/V connecting cable. The
supplied A/V connecting cable is equipped with an S video plug and a video plug. Use
either the S video plug or the video plug depending on the recorder. Do not connect
both of the plugs to the recorder.
Before operation
•Set DISPLAY in
•Press the following buttons to make the indicator disappear so that they will not be
superimposed on the edited tape:
On your camcorder:
DISPLAY/TOUCH PANEL
On the Remote Commander:
DISPLAY, DATA CODE, SEARCH MODE, MULTI SRCH
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
(2) Prepare the VCR for recording, then set the input selector to LINE.
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
A/V
: Signal flow
When you have finished dubbing a tape
Stop recording on the VCR, and stop playback on your camcorder.
80
to LCD in the menu settings. (The default setting is LCD.)
the recorded tape into your camcorder.
Refer to the operating instructions of the VCR.
Refer to the operating instructions of your VCR.
A/V connecting
cable (supplied)
Yellow
Black
White
Red
IN
S VIDEO
VIDEO
AUDIO
VCR