Sony DCR-IP210 Operating Instructions Manual page 99

The micro Cassette Memory
To return to FN
Press EXIT.
To erase the label you have made
Select C in step 4. The last character is erased.
To change the label you have made
Insert the cassette to change the label, and operate in the same way to make a new label.
If you take five minutes or longer to enter characters in the standby mode while a
cassette is in your camcorder
The power automatically goes off. The characters you have entered remain stored in
memory. Set the POWER switch to (CHG) OFF once and then to CAMERA again. After
that, repeat the procedure from step 3. The power does not go off if you enter characters
in VCR mode.
If you set the write-protect tab of the tape to lock
You cannot label the tape. Slide the write-protect tab to release the write protection.
To erase the character
Press T. The last character is erased.
To enter a space
Press t.
To enter the character on the same button in succession
Press t to move the cursor to the next position, and enter the character.
Erasing all the data in micro Cassette Memory
You can delete all the data in micro Cassette Memory at once.
(1) Set the POWER switch to CAMERA or VCR.
(2) Press FN to display PAGE1.
(3) Press MENU, then select ERASE ALL in
EXEC (p. 183).
(4) Press r/R to select OK, then press EXEC. "OK" changes to "EXECUTE."
(5) Press r/R to select EXECUTE, then press EXEC. "ERASING" flashes on the
LCD screen. Once deleting is completed, "COMPLETE" is displayed.
To return to FN
Press EXIT.
To cancel deleting
Select RETURN in step 4 or 5, then press EXEC.
Note
Once you delete all the data in the micro Cassette Memory, the following operations do
not work:
– MULTI-PICTURE SEARCH
– TITLE SEARCH
– DATE SEARCH
Note on the ID number
This item cannot be deleted.
in the menu settings, then press
99