Using The Spot Focus Mode - Spot Focus - Sony DCR-IP210 Operating Instructions Manual

Using the spot focus mode – Spot Focus
You can take a picture with the appropriate focus automatically for just the point you
want to focus on and with its focus fixed.
(1) Set the POWER switch to CAMERA or MEMORY.
(2) Set FOCUS to MANUAL.
(3) Press FN to display PAGE1.
(4) Press SPOT FOCUS. The SPOT FOCUS screen appears.
(5) Press the desired area in the frame on the LCD screen.
The SPOT FOCUS indicator flashes on the LCD screen. When the point you
selected is correctly focused, the SPOT FOCUS indicator stops flashing.
(6) Press
2
FOCUS
AUTO MANUAL
ZOOM
To return to FN
Press EXIT after step 6.
To return to the autofocus mode
Set FOCUS to AUTO.
Note
When adjusting Spot Focus, the following modes do not work:
– Backlight
– Fader
Focal distance information
It is not displayed on the screen.
OK to return to PAGE1.
3
FN
4
SPOT FOCUS
SPOT
FOCUS
OK
69