Siemens SITRANS DA400 Operating Instructions Manual page 81

Slot
12
13
AI
DI
Project the channels that are used from the device catalogue. If a measurement channel is
not used, you can remove it from the cyclical service on the projection as shown in the
following illustration:
SITRANS DA400 for oscillating positive displacement pumps with protection against explosion
Operating Instructions, 10/2007, A5E00841127-01
Name Measurement channel
DI4 Universal input 4 (digital)
DI5 Digital outputs D01 to D06
Analog input
Digital input
PROFIBUS PA
11.2 Projection
Measured value Status
1 byte 1 byte
1 byte 1 byte
81