Siemens SITRANS DA400 Operating Instructions Manual page 44

Operation
6.4 Parameter menu
Parameter Parameter
no. name
P.20 doAL3
P.21 doPR4
P.22 doAL4
P.23 doFAI
P.24 doFAu
P.25 P ouT
P.26 INP1
P.27 INP2
P.28 INP3
P.29 INP4
P.30 AL I1
P.31 AL I2
P.32 AL I3
P.33 AL I4
P.34 do I1
P.35 do I2
P.36 do I3
P.37 do I4
P.38 bUSNr
P.39 APPL
44
Parameter value
As P.15
As P.15
As P.15
As P.15
As P.15
PoS / inv
oFF
24 V
¬24 V
0-20
4-20
20-0
20-4
noPA
As P.26
As P.26
As P.26
-5.0% to 105.0%
-5.0% to 105.0%
-5.0% to 105.0%
-5.0% to 105.0%
oFF, do1, do2, do3, do4, do5,
do6, ¬do1, ¬do2, ¬do3, ¬d04,
¬do5, ¬do6
As P.34
As P.34
As P.34
0 to 126
tYP1
SITRANS DA400 for oscillating positive displacement pumps with protection against explosion
Factory Meaning
setting
do3 Main alarm 3
oFF Pre-alarm 4
do4 Main alarm 4
oFF Input fault summation signal
oFF Internal fault summation signal
PoS Output polarity
oFF Function of universal input 1:
Without function
24 V digital signal > 7 V -> High, passive
normally open contact closed-> High
¬24 V digital signal < 4.5 V -> High, passive
normally open contact open -> High
Analog signal 0 to 20 mA->0 to 100%
Analog signal 4 to 20 mA->0 to 100%
Analog signal 20 to 0 mA->0 to 100%
Analog signal 20 to 4 mA->0 to 100%
Parameter lock
Function of universal input 2
Function of universal input 3
Function of universal input 4
105.0% Universal input 1 alarm
(analog current function only)
105.0% Universal input 2 alarm
(analog current function only)
105.0% Universal input 3 alarm
(analog current function only)
105.0% Universal input 4 alarm
(analog current function only)
oFF Status signal assignment
Universal input 1
oFF Status signal assignment
Universal input 2
oFF Status signal assignment
Universal input 3
oFF Status signal assignment
Universal input 4
126 PROFIBUS address
tYP1 Function of the signal processing
For instrumentation with one sensor per
pump valve Acoustic channels work
independently of each other.
Operating Instructions, 10/2007, A5E00841127-01