Digital Display - Siemens SITRANS DA400 Operating Instructions Manual

Operation

6.2 Digital display

<TRA>
<ACK>
See also
Parameter list (Page 43)
6.2 Digital display
Introduction
The sections below give an overview of the elements that appear in the digital display.
Layout
Pressing the <MEAS> button in the measuring menu activates a test of the digital display,
see the following figure:
Figure 6-2
➀
②
③
Description
In the upper section ➀ of the digital display, alarm messages are indicated using symbols:
● Pre-alarm
● Main alarm
● Summation alarm
32
Trace: call up the trace menu to display and reset various timers
Acknowledge
In the measurement menu: Acknowledge an alarm that has been set off
In the trace menu: Resetting timers
Value is larger
Value is smaller
Scroll forwards in measurement channel list, parameter list and trace list
Scroll backwards in measurement channel list, parameter list and trace list
Digital display
Upper section
Middle section
Lower section
SITRANS DA400 for oscillating positive displacement pumps with protection against explosion
Operating Instructions, 10/2007, A5E00841127-01