Configuration
2.1
Configuring the assembly
Introduction
Create a new project and add the CPU 1517H-3 PN and the 3 ET 200SP distributed I/O
systems. Network the assembly to a PROFINET ring.
Add 2 HMI devices TP1900 Comfort to the assembly.
You do not configure the PM 190 W 120/230 V AC load current supplies.
Requirement
You have set the IP address of the PG/PC, 192.168.0.50 in the example.
Creating a project and assigning hardware
1. Create a new project in STEP 7. Give the project the name "S7-1500H_GS".
Figure 2-1
Creating a new project
2. Select "Configure a device" and then "Configure networks".
The network view opens.
3. Select CPU 1517H-3 PN from the hardware catalog in the network view.
S7-1500R/H redundant system
Getting Started, 10/2018, A5E44910930-AA
2
19